Paper Feed Problems Affecting Image Quality
The Image Is Positioned Incorrectly
Paper feed direction
Original
Output
CEZ523
Cause:
Depending on the paper thickness, floppiness, edge roughness, and curl, the image may become
mispositioned.
Solution:
Adjust the image position.
• When using a custom paper, select [Machine: Image Position] in [Advanced Settings] for the
custom paper in use and specify the following for 1101: [Image Position] to adjust the image
position.
• [Across Feed] of [Image Position: Side 1]
• [With Feed] of [Image Position: Side 1]
• [Across Feed] of [Image Position: Side 2]
• [With Feed] of [Image Position: Side 2]
• If you are not using a custom paper, specify the following for [Main Unit: Image Position] group in
[Adjustment Settings for Operators] group to adjust the image position.
• 0101: [Image Position: With Feed]
• 0102: [Image Position: Across Feed]
If the problem persists even though you have adjusted the setting to its maximum and minimum values,
contact your service representative.
Paper Feed Problems Affecting Image Quality
93
To Next Page
Loading...
Need help?
General
