Sartorius combics 1 Service Manual

30
display_serv_01.eps
menu_197.eps
1-9-5 Internal Linearization (Only for WP1 on COM1 or UniCOM Ports)
1-9-7 External Linearization with User-defined Weights
– Activate the service mode (see page 17).
– Select weighing platform »WP1«.
– Press the ) key to open the numeric menu.
– Select menu item 1-9-7 (External linearization with user-defined weight) (key
sequence: ), then, several times, k )) and confirm by pressing )
briefly.
– Press and hold the ) key to store the selected menu items and return the
Combics indicator to the weighing mode.
When this menu setting is already active, you can exit the Service mode by
turning the Combics indicator off and then on again.
– After taring or zeroing the scale, press and hold the ) key until Lin is
displayed.
Display_WP1_Serv.eps
display_lin.eps

Sartorius combics 1 Specifications

General

Brand	Sartorius
Model	combics 1
Category	Monitor
Language	English