Sartorius combics 1 Service Manual

52
Menu Item 9-1:
A/D Converter Configuration (Example: Trade Configuration)
– Activate the service mode (see page 17).
– Press k repeatedly to select weighing platform »WP1«.
– Press the ) key to open the numeric menu. The first menu page is displayed.
– Open menu item 9-1 (Factory setting/Menu reset)
(key sequence: k k )).
Loading the Trade Configuration
– Select menu item 9-1-4 (Trade configuration) and confirm
(key sequence: ) k k)).
The selected configuration is loaded. »Busy« is displayed briefly.
Afterwards, the program returns to the display of menu item 9-1-2
(Restore factory defaults: »Off«; factory setting).
display_wp1_serv.eps
display_serv_01.eps
display_serv_91.eps
display_serv_914.eps
display_busy.eps
display_serv_912.eps

Sartorius combics 1 Specifications

General

Brand	Sartorius
Model	combics 1
Category	Monitor
Language	English