57
“Busy” is displayed briefly.
Afterwards, the Combics is re-started. The scale is in the normal weighing
mode.
Then adjust the weighing instrument and, if the Trade configuration is active,
return the menu access switch from the “accessible” to the “closed” position (see
page 12).
Menu Item 9-1: A/D Converter Configuration with Load Cell(s) Connected
(Example: Standard Configuration
– Activate the service mode (see page 17).
– Press ) repeatedly to select weighing platform »WP1«.
– Press the ) key to open the numeric menu. The first menu page is displayed.
– Open menu line 9-1 (Factory settings/Reset menu).
Display_busy.eps
Display.eps
Display_WP1_Serv.eps
Display_Serv_01.eps
To Next Page
Loading...
Need help?
General
