Sartorius combics 1 Service Manual

8
Qty. Designation Order No.
1 Torque wrench, 10-120 Nm 14x18, stainless steel
1 Torque wrench, 60-320 Nm 14x18, stainless steel
1 Set of open-ended wrenches with sockets
1 Set of sockets, up to 30 mm (hexagonal, stainless steel)
2 Transport belt (to move load plates or weighing
platforms; available from specialist suppliers)
2 Ring lugs (stainless steel; for moving the load plates or
weighing platforms; available from specialist suppliers)
1 Set open-ended wrenches (spanners) (up to 24 mm, stainless steel)
1 Threaded rod, M 16x120, for lifting the weighing platform
(available from specialist supplier)
1 Testing device for checking IP66/67 protection (not yet defined)
1 Set of screwdrivers (slotted)
1 Set of screwdrivers (Phillips head )
1 Set of Allen wrenches
1 Digital voltmeter (Beckman) 6738-62
1 Strain gauge simulator 6740-74
1 RS-232/485 converter 6740-68
Accompanying Literature
Operating instructions for “Combics 1 | 2 Indicators“ WCI6004-e03081 98648-012-27
Operating instructions for “Painted or Stainless Steel Weighing Platforms“ WCA6004-e03081 98648-012-26

Sartorius combics 1 Specifications

General

Brand	Sartorius
Model	combics 1
Category	Monitor
Language	English