Siemens LMV27.100x2 User Manual

139/219
Building Technologies Basic Documentation LMV27... CC1P7541en
25 Service level 17.12.2018
25.2 Display of service values (example)
25.2.1 Number of faults
P
Vh
min s %
Bild 40/0707
The display shows parameter 161: flashing on
the left, the number of faults that occurred thus
far on the right 0.
Example: Parameter 161: 0
To the next parameter
or
/
reset
<1 s
Back to the previous
parameter.
25.2.2 Error history
Refer to chapter Parameter with index, without direct display/Example of parameter 701: Error history!

Note
Can be deleted for service (refer to chapter Parameter list)!
25.2.3 Intensity of flame
P
Vhmins%
Bild 41/0707
The display shows parameter 954: flashing on the
left.
On the right, the flame’s intensity is displayed as
a percentage.
Example: 954: 0.0
To the next parameter
or
/
reset
<1 s
Back to the previous
parameter.

Note
Also refer to chapter Intensity of flame during curve settings.
25.2.4 End of service level
P
Vh
mi n
s%
Bild 38/0707
When this display appears, you have reached the
end of the service level.
Display – End – appears flashing.
To the start of the service
level
To the end of the service
level
ES
C
P
Vh
mi n
s%
Bild 22/0707
Press
ESC
to return to the normal display.
OPErAtE appears for a short moment.
P
Vh
mi n
s%
Bild 9/0707
When this display appears, you are back on the
normal display and you can change to the next
level mode.

Siemens LMV27.100x2 Specifications

General

Brand	Siemens
Model	LMV27.100x2
Category	Controller
Language	English