19/219
Building Technologies Basic Documentation LMV27... CC1P7541en
1 Safety notes 17.12.2018
1.10 Service notes
If fuses are blown, the unit must be returned to Siemens (refer to chapter
Warning notes)
Error diagnostics can only be made via the LMV27 (BC interface)
Note!
Only authorized persons may replace the fuse (according to EN 298-1, chapter 9.2.r)
1.11 Life cycle
The burner management system has a designed lifetime* of 250,000 burner startup
cycles which, under normal operating conditions in heating mode, correspond to approx.
10 years of usage (starting from the production date given on the type field).
This lifetime is based on the endurance tests specified in standard EN 298.
A summary of the conditions has been published by the European
Control
Manufacturers Association
(Afecor) (www.afecor.org).
The designed lifetime is based on use of the LMV27 according to the manufacturer’s
Data Sheet and Basic Documentation. After reaching the designed lifetime in terms of
the number of burner startup cycles, or the respective time of usage, the LMV27 is to be
replaced by authorized personnel.
* The designed lifetime is not the warranty time specified in the Terms of Delivery
1.12 Disposal notes
The unit contains electrical and electronic components and must not be disposed of
together with household waste. Local and currently valid legislation must be observed.
To Next Page
Loading...
Need help?
General
