Sony MVS-6530 User Manual

USO RESTRITO
112
Overview
Pattern group
Effect
Page Turn
The old video moves like a page turning, and the new video appears behind it.
Roll
The new video unrolls like a scroll over the old video. This is a type of page turn.
Frame I/O
Completed in two transitions. In the first transition, the new video appears, then on the second
transition the new video goes out and the old video returns.
P in P
• In one-channel mode, this completes in two transitions.
- In the first transition, the old video shrinks, and the new video appears behind it.
- In the second transition, the old video expands again until it is its original size.
• In two-channel mode, in the first half of the transition, the old video shrinks, and the new video
appears.
- In the second half of the transition, the new video expands, and the old video disappears.
- You can move the pattern from the current position by a relative amount.
- During the transition, the signal from the utility bus of the M/E bank appears as the background.
2D Trans
The new video appears over the old video, while undergoing expansion, two-dimensional rotation and
translation.
3D Trans
• In one-channel mode, the new video appears over the old video, while undergoing expansion, three-
dimensional rotation and translation.
• In two-channel mode, the old video changes to the new video while both undergo expansion, three-
dimensional rotation and translation.
Sparkle
The new video appears over the old video with a nonlinear effect applied, such as broken glass,
explosion, or melt. Then the original video returns as the effect gradually reduces.
Split Slide
The new video appears in strip form while sliding interleaved in the opposite direction over the old
video.
Mosaic
In the first half of the transition, a mosaic is gradually applied to the old video, then at the 50% point
the inner image changes to the new video. In the second half, the mosaic effect on the new video is
gradually reduced, returning to the original image at 100%.
Defocus
In the first half of the transition, the old video is gradually defocused, then at the 50% point the inner
image changes to the new video. In the second half, the defocusing effect on the new video is
gradually reduced, returning to the original image at 100%.
Brick
A brick, such that the side surface is visible, slides in over the old video, then rotates so that the new
video can be seen.
User Program
Using a DME keyframe effect created with a keyframe operation, this executes a DME wipe.
For details about creating keyframe effects, 1 “Creating User Programmable DME Patterns” (p. 121).
Resizer Slide
Performs a “Slide” DME wipe using a resizer.
Resizer Squeeze
Performs a “Squeeze” DME wipe using a resizer.
Resizer Frame I/O
Performs a “Frame I/O” DME wipe using a resizer.
Chapter
6
DME
Wipes
DME wipe execution mode and pattern numbers that can be used
There are two DME wipe execution modes, depending on
the number of DME channels available: one-channel mode
(1ch) and two-channel mode (2ch).
Notes
2-channel mode patterns are not supported on the MVS-
3000.
The channel mode and pattern number supported in each
pattern group is given below.
For details about pattern images (excluding user
programmable DMEs), 1 “DME Wipe Pattern List”
(p. 381) and 1 “Resizer DME Wipe Pattern List”
(p. 385).
DME wipe pattern
MVS-6520/6530/3000A
MVS-3000
Group
Execution
mode
DME wipes in common
transitions
DME wipes in
independent key
transitions
DME wipes in common
transitions
DME wipes in
independent key
transitions
Background
Key
Background
Key
Slide
1ch
1001 to 1008
1001 to 1008
–
2ch
2601 to 2608
–
–
–

Sony MVS-6530 Specifications

General

BNC input ports	48
BNC output ports	32
RJ-45 input ports	4
Product color	Black
AC input voltage	100 - 240 V
AC adapter frequency	50/60 Hz
AC adapter input current	4 A
Storage temperature (T-T)	-20 - 55 °C
Operating temperature (T-T)	5 - 40 °C

Weight and Dimensions

Depth	486 mm
Width	482 mm
Height	176 mm
Weight	21000 g