Sony MVS-6530 User Manual

USO RESTRITO
56
Power Supply and Connectors
Chapter
2
Names
and
Functions
of
Parts
ICP-6520/6530/3000/3016 Control Panel
Top panel
ICP-6520 and ICP-
6530
ICP-6520 diagram shown.
Status indicators A and B
POWER switch
ICP-3000 and ICP-
3016
ICP-3000 diagram shown.
POWER switch and status indicators A and B
When power is supplied to the AC IN A and B connectors
on the rear panel, the status indicators (green) light. If you
press the POWER switch under this condition, 1 lights
green and the panel turns on.
Shutting down the control panel
Press [Shutdown] in the top menu list or top menu
window, and follow the on-screen instructions. After the
menu screen goes fully black, check that the control panel
power switch indicator 1 has gone out.
You can forcibly turn off the power without shutting down
by pressing and holding the POWER switch for about five
seconds.
Notes
• If status indicator A or B does not light even when power
is supplied to the AC IN A and B connectors, there may
be a fault in the power circuits. Disconnect the cords
from the AC IN A/B connectors, and contact your Sony
service representative.
• If you force shutdown without performing shutdown
processing, setting data may not be saved.
• Shut down the control panel before turning off the AC
power supply (or disconnecting the power cord).

Sony MVS-6530 Specifications

General

BNC input ports	48
BNC output ports	32
RJ-45 input ports	4
Product color	Black
AC input voltage	100 - 240 V
AC adapter frequency	50/60 Hz
AC adapter input current	4 A
Storage temperature (T-T)	-20 - 55 °C
Operating temperature (T-T)	5 - 40 °C

Weight and Dimensions

Depth	486 mm
Width	482 mm
Height	176 mm
Weight	21000 g