Sony MVS-6530 User Manual

USO RESTRITO
264
Register Operations in the Menus
No.
Parameter
Adjustment
4
Eff Diss
Duration
Dissolve duration
No.
Parameter
Adjustment
5
Temp Dur
Temporary attribute dissolve
duration
1
Open the Effect >Effect 1-99 >Attribute menu (6221).
2
Press the region display in the upper part of the list,
and in the selection window select the region.
You can select more than one region.
To select all regions, press [ALL].
3
Press [OK].
4
Select a register.
To select all registers, press [ALL].
5
Press [Effect Dissolve], turning it on.
6
Set the duration.
Chapter
12
Keyframes
• Effect Attribute Settings ( 1 p. 264)
• Effect Status Display ( 1 p. 264)
• Effect Register Editing ( 1 p. 264)
Here, the menu for dedicated effect registers 1 to 99 is
described as an example.
You operate user programmable DME registers (MVS-
6520/6530/3000A only) in the same way using the Effect
101-199 menu or Effect 201-299 menu.
For registers for P-Bus and Device1 to Device12, carry out
Region name: The selected region name appears in the
upper part of the list.
Register number
Register name
Write-protected status: When the register is write-
protected, a letter “L” appears.
Empty status: When the register is empty, a letter “E”
appears.
similar operations using the DEV/PBUS Effect 1-250
menu.
Effect Register Editing
You can carry out the following editing on effect registers
Effect Attribute Settings
Applying effect dissolve
To apply the “effect dissolve” attribute to a keyframe
effect, use the following procedure.
and master timeline registers.
• Lock: Write-protect the contents of the register.
• Copy: Copy the contents of one register to another
register.
• Merge: Merges the data of two registers. It is not
possible to merge master timeline registers.
• Move: Move the contents of one register to another
register.
• Swap: Swap the contents of two registers.
• Delete: Delete the contents of a register.
• Name: Attach a name to a register.
Write-protecting the contents of the effect
register
Setting the duration for a temporary
attribute
Set the following parameter to set the duration for a
temporary attribute in the Flexi Pad.
Notes
It is not possible to write-protect an empty register.
1 Open the Effect >Effect 1-99 >Lock menu (6222).
2 Press the region display in the upper part of the list,
and in the selection window select the region.
You can select more than one region.
To select all regions, press [ALL].
3 Press [OK].
4 Select a register.
To select all registers, press [ALL].
5 Press [Lock], turning it on.
To release the lock
Select the register you want to unlock, and press [Lock],
turning it off.
Effect Status Display
The Effect >Effect 1-99 menu displays the following
information.

Sony MVS-6530 Specifications

General

BNC input ports	48
BNC output ports	32
RJ-45 input ports	4
Product color	Black
AC input voltage	100 - 240 V
AC adapter frequency	50/60 Hz
AC adapter input current	4 A
Storage temperature (T-T)	-20 - 55 °C
Operating temperature (T-T)	5 - 40 °C

Weight and Dimensions

Depth	486 mm
Width	482 mm
Height	176 mm
Weight	21000 g