Sony MVS-6530 User Manual

USO RESTRITO
314
Setting the Signal Format
System
Field frequency
Effective number of
scan lines
HD system
50
1080i
59.94
23.976
1080PsF
24
50
720P
59.94
SD system
59.94
480i
50
576i
Switcher signal
format setting
Format converter signal format setting
FC Input 1 to 8
FC Output 1, 2
480i/59.94
720P/59.94
720P/59.94
1080i/59.94
1080i/59.94
576i/50
720P/50
720P/50
1080i/50
1080i/50
720P/50
576i/50
576i/50
1080i/50
1080i/50
720P/59.94
480i/59.94
480i/59.94
1080i/59.94
1080i/59.94
1080i/50
576i/50
576i/50
720P/50
720P/50
1080i/59.94
480i/59.94
480i/59.94
720P/59.94
720P/59.94
Chapter
17
System
Setup
1 In the Engineering Setup >System >Format menu
(7313), select the device for operations.
2 Press [Signal Format].
3 Press the button for the desired signal format.
Switching the Input Reference
Signal for HD System
Notes
The DME1 input reference signal is common to the
switcher.
In the <Ref Input Format> group of the Engineering Setup
>System >Format menu (7313), select one of the
following.
Tri Sync: Tri-level sync for an HD system
BB (Black Burst): Black burst or sync
The following table shows the relation between signal
format and the frequency of a signal that can be used as the
input reference signal.
Setting Conversion Formats
The format conversion is valid only when [BB] is selected
in the <Ref Input Format> group.
The format conversion is assigned to primary inputs and
outputs in advance.
For details about the assignment, 1 “Selecting the
Primary Input to be Used in the Format Converter”
(p. 348) and 1 “Selecting the Output to be Used as the
Format Converter” (p. 353).
Format converter
The following video signal conversion formats are
supported by the format converter.
• Up-conversion: SD (4:3) to HD (16:9)
• Down-conversion: HD (16:9) to SD (4:3)
• Cross-conversion: HD (720P) to HD (1080i), or HD
(1080i) to HD (720P)
The number of format converter inputs and outputs can be
set to one of the following in “FC Config” ( 1 p. 322).
• 8 inputs, no outputs
• 4 inputs, 2 outputs
Notes
After format conversion, input and output signals have
one-frame delays with respect to the reference signals. To
synchronize converted input signals and unconverted input
signals, it is possible to delay the unconverted input signal.
For details, 1 “To delay unconverted input signals
(frame delay function)” (p. 315).
Conversion format combinations
The combinations of switcher signal formats and
supported format converter formats are as follows.
Signal format
Input reference signal
Tri Sync
BB
1080i/59.94
59.94
Black Burst
59.94
Sync 59.94
1080i/50
50
Black Burst 50
Sync 50
1080PsF/24
48
–
1080PsF/23.976
47.952
–
720P/59.94
59.94
Black Burst
59.94
Sync 59.94
720P/50
–
Black Burst 50
Sync 50

Sony MVS-6530 Specifications

General

BNC input ports	48
BNC output ports	32
RJ-45 input ports	4
Product color	Black
AC input voltage	100 - 240 V
AC adapter frequency	50/60 Hz
AC adapter input current	4 A
Storage temperature (T-T)	-20 - 55 °C
Operating temperature (T-T)	5 - 40 °C

Weight and Dimensions

Depth	486 mm
Width	482 mm
Height	176 mm
Weight	21000 g