Sony MVS-6530 User Manual

USO RESTRITO
Error Messages 437
No external HDD was found (–2).
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the external HDD could not be found. Check
that the external HDD is correctly connected.
Format operation failed (–10).
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, formatting of the HDD failed.
Format operation failed (–11).
Cannot access the partition (–12).
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the logical drives of the external HDD could
not be accessed. Check that the external HDD is correctly formatted.
Cannot access the directory (–20).
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the directory of the external HDD could not be
accessed.
Cannot access the directory (–21).
The external HDD is busy (–22).
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the external HDD was busy and could not be
accessed. Check that the access lamp of the HDD or the menu indicator is
turned off, and try again.
ERROR (–31).
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the external HDD could not be written to
because the clip is currently playing or recording.
Backup operation failed (–34).
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the process to store the file to the external
HDD failed.
Backup operation failed (–36).
Cannot be executed.
Amount of FM files exceeds the
capacity of usable frame memory.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the number of files exceeded the storage limit.
Cannot be executed.
The function requires two frames of
frame memory.
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, two files were required but there was only one
file remaining.
No directory exists (–50).
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, the specified directory did not exist.
Rename operation failed (–52).
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Backup] was pressed, renaming the directory failed.
Rename operation failed (–53).
Invalid FM OutCh (–6).
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, the specified frame memory output
channel could not be used.
Specified FM OutCh was locked (–7).
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, the specified frame memory output
channel was locked.
Not enough free register area for
Backup or Restore process (–10).
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, there was insufficient capacity to carry
out the backup.
Prepare failed, not any file was found
on this board (–11).
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, no image files were found.
Backup failed, not prepared yet (–12).
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, the device was not yet ready.
Backup failed, Clip recall failed (–13).
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, All One Clip recall failed (internal
processing error).
Prepare failed, Clip create failed (–14).
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, All One Clip creation failed (internal
processing error).
Appendix
Icon
Message
Description
[Append Key Frame] cannot be
executed.
Key Frame Register is not active.
(UserX)
2515: Frame Memory >Still >Create Key Frame
When [Append Key Frame] was pressed, the region selection button for a
register on the Flexi Pad was not selected. Select the region selection
button [UserX] on the Flexi Pad, and try again.
Backup

Sony MVS-6530 Specifications

General

BNC input ports	48
BNC output ports	32
RJ-45 input ports	4
Product color	Black
AC input voltage	100 - 240 V
AC adapter frequency	50/60 Hz
AC adapter input current	4 A
Storage temperature (T-T)	-20 - 55 °C
Operating temperature (T-T)	5 - 40 °C

Weight and Dimensions

Depth	486 mm
Width	482 mm
Height	176 mm
Weight	21000 g