Steris AMSCO 7052HP User Manual

5 — Cycle and Control Value Programming
104
Operator Manual
AMSCO® 7000 Series 10432589_G
2. Press Transfer Cycle Reports on Supervisor mode screen. Display shows Transfer Cycle Reports screen:
NOTE: To verify USB key format, see Section 5.16, Formatting USB Key.
3. Insert USB key in USB port and press Yes on touch screen. Display shows USB Copy screen:
4. When copy is completed, display shows message indicating all pdf reports were transferred correctly.
5. Press Close on touch screen to return to Supervisor mode screen.
5.5 Miscellaneous Menu
To modify or enable specific miscellaneous features, access Miscellaneous screen as follows:

Steris AMSCO 7052HP Specifications

General

Brand	Steris
Model	AMSCO 7052HP
Category	Washer
Language	English