3 — Component Identification
20
Operator Manual
AMSCO® 7000 Series 10432589_G
Obstruction Sensor
Chamber doors are equipped with an obstruction sensor that detects any door obstruction. If an obstruction is present,
door automatically opens.
Load Access Code
A safety feature prevents opening of doors if a cycle has not been successfully completed.
When a cycle has been interrupted (operator has aborted cycle), a load access code must be entered by an authorized
person to unlock and open load side door only. This prevents cross-contamination. Refer to Section 5.1, Cycle and Control
Value Programming — General for more details on load access code.
3.4 SCS Conveyor System (Option)
See Figure 3-9.
The optional SCS Conveyor System is designed to be used in processing departments of healthcare facilities, to provide
automated loading and unloading of accessory racks or baskets and to interface with the AMSCO 7052HP Single-
Chamber Washer/Disinfector and/or the AMSCO 7053HP Single-Chamber Washer/Disinfector.
The optional SCS Conveyor System is composed of two types of conveyors: manual conveyors with non-motorized
rollers and automatic conveyors with motorized rollers. The SCS Conveyor System can also be equipped with a bar code
reader that scans a bar code on the indexed rack and automatically starts the appropriate cycle. Refer to the SCS
Conveyor System Operator Manual for more detailed information about the optional SCS Conveyor System.
To Next Page
Loading...
Need help?
General
