Steris AMSCO 7052HP User Manual

7 — Troubleshooting
206
Operator Manual
AMSCO® 7000 Series 10432589_G
7.96 ALARM# 48 RINSE RESERVOIR SAFETY WATER LEVEL SWITCH REACHED (CRITICAL)
Condition
Alarm is triggered when reservoir safety water level switch is activated for a consecutive time of 200 ms.
General Troubleshooting
Additional Information
Cycle must be aborted and then restarted.
1. Press Silence Buzzer on touch screen to stop alarm
buzzer.
2. Press Ack on touch screen to acknowledge alarm.
3. Press Abort on touch screen to abort cycle.
4. Repeat cycle.
5. Change Rinse and Thermal Rinse water ports to hot
water, then contact STERIS.
7.97 ALARM# 49 RINSE RESERVOIR TRANSFER MALFUNCTION (CRITICAL)
Condition
Alarm is triggered if pressure reading was too low during water transfer from reservoir to chamber.
General Troubleshooting
Additional Information
Cycle must be aborted and then repeated.
1. Press Silence Buzzer on touch screen to stop alarm
buzzer.
2. Press Ack on touch screen to acknowledge alarm.
3. Press Abort on touch screen to abort cycle.
4. Repeat cycle.
5. Change Rinse and Thermal Rinse water ports to hot
water, then contact STERIS.
7.98 ALARM# 50 RINSE RESERVOIR TEMPERATURE TOO HIGH (CRITICAL)
Condition
Alarm is triggered when reservoir temperature reading has reached maximum allowed temperature.
General Troubleshooting
Additional Information
Breaker tripped.
1. Press Silence Buzzer on touch screen to stop alarm
buzzer.
2. Press Ack on touch screen to acknowledge alarm.
3. Press Abort on touch screen to abort cycle.
4. Wait for washer/disinfector to cool down.
5. Circuit breaker tripped, contact STERIS.

Steris AMSCO 7052HP Specifications

General

Brand	Steris
Model	AMSCO 7052HP
Category	Washer
Language	English