5 — Cycle and Control Value Programming
124
Operator Manual
AMSCO® 7000 Series 10432589_G
5. Press Delete to delete all cycle history files.
6. During files deletion, display shows message indicating files are being deleted.
7. When all files are deleted, display returns to Supervisor mode screen.
5.16 Formatting USB Key
To be compatible with reporting features, USB key must be formatted to FAT32. From the factory almost all USB keys
are formatted as FAT32 for maximum compatibility among operating systems. Older keys of 2 GB and smaller
capacities were usually formatted as FAT (FAT16).
Checking USB Key Format
To check USB key format in Microsoft Windows, proceed as follows:
NOTE: If your version of Microsoft Windows differs from below, refer to the Microsoft Corporation website for relevant
procedure.
1. Open the Computer/This PC window. This window displays all of the drives connected to your computer. There
are several ways to open this:
2. Open the Start menu and select "Computer," or double-click the Computer icon on your desktop.
3. Right click the USB Flash key listed.
To Next Page
Loading...
Need help?
General
