Steris AMSCO 7052HP User Manual

5 — Cycle and Control Value Programming
107
10432589_G AMSCO® 7000 Series
Operator Manual
14. Once modifications are completed, press Close on touch screen to return to Miscellaneous menu.
15. Press Right arrow on touch screen to access remaining Miscellaneous menu:
16. If present, enable (Yes) or disable (No) conductivity reading.
When enabled, conductivity readings during draining of the Thermal Rinse phase are recorded and printed.
Minimum and Maximum values read are reported as well as the average value.
17. If present, enable (Yes) or disable (No) handheld bar code reader (EMEA only).
18. Once modifications are completed, press Close on touch screen to return to Supervisor mode screen.
5.6 Password Menu
To modify supervisor password, access Password screen as follows:
1. Access Supervisor mode as explained in Section 5.2, Supervisor Mode Menus. Display shows Supervisor mode
screen:

Steris AMSCO 7052HP Specifications

General

Brand	Steris
Model	AMSCO 7052HP
Category	Washer
Language	English