Steris AMSCO 7052HP User Manual

5 — Cycle and Control Value Programming
110
Operator Manual
AMSCO® 7000 Series 10432589_G
5.8 Prime Chemical Pumps Menu
To access Prime screen, proceed as follows:
1. Access Supervisor mode as explained in Section 5.2, Supervisor Mode Menus. Display shows Supervisor mode
screen:
2. Press Right arrow on touch screen to access following supervisor mode menu:
3. Press Prime Chemical Pumps on Supervisor mode screen. Display shows Prime screen:
Refer to Uncrating/Installation Instructions (10432588) for more information on priming procedure.

Steris AMSCO 7052HP Specifications

General

Brand	Steris
Model	AMSCO 7052HP
Category	Washer
Language	English