Steris AMSCO 7052HP User Manual

5 — Cycle and Control Value Programming
116
Operator Manual
AMSCO® 7000 Series 10432589_G
2. Press Right arrow on touch screen until accessing following supervisor mode menu:
3. Press Tests on Supervisor mode screen. Display shows Tests screen:
4. To proceed with door safety test, refer to Section 6.13, Door Safety Test.
5. To proceed with sump safety level test, refer to Section 6.14, Sump Safety Level Test.
6. To proceed with water inlet pressure test, refer to Section 6.15, Water Inlet Pressure Test.
5.15 Cycle History Menu
Cycle History Menu is used to print, save or delete Cycle History files. Other History options are available through this
menu.
Enable History Options
To enable specific history features, access History Options screen as follows:
1. Access Supervisor mode as explained in Section 5.2, Supervisor Mode Menus. Display shows Supervisor mode
screen:

Steris AMSCO 7052HP Specifications

General

Brand	Steris
Model	AMSCO 7052HP
Category	Washer
Language	English