Steris SYSTEM 1E Service Manual

2-18
764333-675
2.2.1 Enhanced Operator Mode Print-outs
The printouts in the Enhanced Operator mode (see
Figure 2-10) are expanded to give more cycle detail.
This detail can be used to help troubleshoot a unit.
2.2.2 Burn-In SYSTEM 1E Liquid Chemical
Sterilant Processing System
Selecting Burn-In sets all parameters to default values,
and printer prints the default values.
2.2.3 How To Exit Service Mode
To exit Service Mode, turn power OFF, then turn power
back ON.

Steris SYSTEM 1E Specifications

General

Brand	Steris
Model	SYSTEM 1E
Category	Laboratory Equipment
Language	English