ENGINE 3-57
CRANKCASE
• Clean and degrease the crankcase mating surfaces (both sur-
faces).
• Fit the dowel pins
1 into the left crankcase.
• Apply SUZUKI BOND to the both crankcases.
, 99000-31110: SUZUKI BOND “1215” or equivalent
#
• Assemble the crankcases with in few minutes.
* Coat the sealant evenly without break.
* Application of sealant must be performed within a
short period of time.
* Take extreme care not to let sealant enter into the oil
hole or bearing.
To Next Page
Loading...
Need help?
General
