8-40 CHASSIS
FRONT BRAKE CALIPER INSPECTION
Inspect the caliper cylinder wall and piston surface for scratch,
corrosion or other damages.
If any abnormal condition is noted, replace it with a new one.
Inspect the caliper bracket

1 for any damage.
Inspect the rubber boots

2 for any damage.
If any abnormal condition is noted, replace it with a new one.
FRONT BRAKE CALIPER REASSEMBLY
Reassemble the caliper in the reverse order of disassembly.
Pay attention to the following points:
#
- Specification and classification: DOT 4
• Install the piston seals and dust seals as shown in the right
illustration.
• Install the pistons.
* Wash the caliper components with fresh brake fluid
before reassembly. Do not wipe off brake fluid after
washing the components.
* Replace the piston seals and dust seals with new
ones with brake fluid applied.
To Next Page
Loading...
Need help?
General
