CHASSIS 8-9
SEAT
REMOVAL
• Open the seat.
• Remove the seat by removing the three nuts.
INSTALLATION
Installation is in the reverse order of removal.
PILLION RIDER HANDLES
REMOVAL
• Open the seat.
• Remove the pillion rider handles
î›§
1 (LH and RH).
INSTALLATION
Installation is in the reverse order of removal.
LOWER FRAME COVER
REMOVAL
• Remove the screws and pull out the lower frame cover
î›§
1.
!: indicates hook location
INSTALLATION
Installation is in the reverse order of removal.
FRAME COVER
REMOVAL
• Remove the front frame cover. ("8-8)
• Remove the lower frame cover. ("Above)
• Disconnect the rear combination light coupler
î›§
1.
• Remove the frame covers along with the rear combination
light and rear footboards.