2-4 PERIODIC MAINTENANCE
MAINTENANCE AND TUNE-UP PROCEDURES
This section describes the servicing procedures for each item of the Periodic Maintenance requirements.
AIR CLEANER
REMOVAL
• Remove the air cleaner cover

1.
• Remove the polyurethane foam element

2.
• Remove the non-woven fabric element

3.
CLEANING
Polyurethane foam element
• Fill a washing pan of a proper size with a non-flammable
cleaning solvent. Immerse the element in the cleaning solvent
and wash it.
• Gently squeeze the element to remove the excess solvent: do
not twist or wring the element or it will develop tears.
• Immerse the element in motor oil and squeeze out the excess
oil. The element should be wet but not dripping.

A: Non-flammable cleaning solvent

B: Motor oil SAE #30 or SAE 10W-40
!
• Reinstall the cleaned or new element in the reverse order of
removal.
(POLYURETHANE FOAM ELEMENT)
Clean every 3 000 km (2 000 miles).
(NON-WOVEN FABRIC ELEMENT)
Inspect every 4 000 km (2 500 miles, 20 months) and
replace every 12 000 km (7 000 miles).
Torn element must be replaced.
To Next Page
Loading...
Need help?
General
