8-32 CHASSIS
REASSEMBLY
Reassembly and reinstallation can be performed in the reverse
order of removal and disassembly procedures. Pay attention to
the following points:
• Press in the upper and lower outer race using the special tool.
& 09941-34513: Steering race installer
• Install new dust seal.
• Press in the lower stem bearing race
1.
& 09925-18011: Steering bearing installer
09940-51410: Attachment
• Apply grease to the upper bearing and upper inner race prior
to installing the steering stem.
' 99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
• Install the upper bearing and upper inner races.
• Apply grease to the lower bearing prior to installing the steer-
ing stem.
• Install the steering stem.