FI SYSTEM DIAGNOSIS 4-63
SENSORS
CKP SENSOR INSPECTION
The crankshaft position sensor is installed behind the generator
cover. (#4-30)
CKP SENSOR REMOVAL AND INSTALLATION
• Remove the generator cover. (#3-14)
• Install the generator cover in the reverse order of removal.
IAP SENSOR INSPECTION
The intake air pressure sensor is installed on the throttle body.
(#4-33)
IAP SENSOR REMOVAL AND INSTALLATION
• Remove the trunk box. (#8-11)
• Remove the IAP sensor.
• Install the IAP sensor in the reverse order of removal.
TP SENSOR INSPECTION
The throttle position sensor is installed on the throttle body.
(#4-38)
TP SENSOR REMOVAL AND INSTALLATION
• Remove the trunk box. (#8-11)
• Remove the TP sensor. (#5-11)
• Install the TP sensor in the reverse order of removal.
ECT SENSOR INSPECTION
The engine coolant temperature sensor is installed at the cylin-
der head. (#4-43)
ECT SENSOR REMOVAL AND INSTALLATION
• Remove the ECT sensor. (#7-10)
• Install the ECT sensor in the reverse order of removal.
* ECT sensor: 18 N·m (1.8 kgf-m)
To Next Page
Loading...
Need help?
General
