CHASSIS 6-35
• Remove the handlebar set bolts.
• With the handlebar clamp bolts and steering stem head nut
loosened, remove the steering stem upper bracket.
• With the handlebar clamp bolts loosened, draw out the handle-
bars to upward.
REASSEMBLY AND REMOUNTING
Reassemble and remount the handlebar in the reverse order of
removal and disassembly.
Pay attention to the following points:
• Install the handlebars temporaly.
• Install the steering stem upper bracket.
NOTE:
If it is difficult to install the steering stem upper bracket, loosen
the axle pinch bolts of right front fork.
• Tighten the steering stem head nut.
!!
!!
! Steering stem head nut: 90 N
.
m (9.0 kgf
.
m, 65.0 lb-ft)
• Tighten the front fork upper clamp bolts.
!!
!!
! Front fork upper clamp bolt: 23 N
.
m (2.3 kgf
.
m, 16.5 lb-ft)
To Next Page
Loading...
Need help?
General
