8-20 SERVICING INFORMATION
FRONT BRAKE HOSE ROUTING
Clamp the brake hose firmly.
42Ëš
42Ëš42Ëš
After touching the brak
e hose unions
to the stopper, tighten the union bolts.
After touching the brake hose unions
to the stopper, tighten the union bolts.
Clamp the brake hose firmly.
After fixing the guide on outside,
tighten the clamp bolt.
Pass through the brake hose
behind the throttle cables.
Insert the clamp to the hole
of the front fender fully.
The green paint is right side
and face upside.
Left Right
15Ëš
42Ëš42Ëš