4-68 FI SYSTEM AND INTAKE AIR SYSTEM
Fuel pressure
check bolt
To fuel feed hose
THROTTLE BODY REASSEMBLY
Reassemble the throttle body in the reverse order of disassem-
bly.
Pay attension to the following points:
• When installing the TP sensor, align the groove 1 with the lib
2.
TP sensor setting procedure
4-28
[ 09930-11960: Torx wrench
• Apply thin coat of the engine oil to the new O-rings 3.
#
Replace the O-ring with a new one.
• Assemble the fuel delivery pipes.
• Assemble the fuel delivery pipes as show in the illustration.
90˚
To fuel feed hose
Throttle body
Injector
90˚
Fuel pressure
check bolt
Throttle body
Injector
To Next Page
Loading...
Need help?
General
