7-28 ELECTRICAL SYSTEM
Adjust switch Tachometer
Speedometer
Engine coolant temp. /FI
Odo/Trip 1/Trip 2/Clock
Select switch
LED
: LED (Speedometer light)
LED
Stepping motor LCD
COMBINATION METER
DESCRIPTION
This combination meter mainly consists of the stepping motor, LCD (Liquid Crystal Display) and LED (Light
Emitting Diode). This combination meter is light, thin and high response on those currently in use because of
this composition.
The rpm pointer is driven by the stepping motor.
The LCDs indicate speed, Odo/Trip1/Trip2/Clock and engine coolant temp./FI respectively.
LED (Light Emitting Diode)
LED is used for the illumination light and each indicator light.
LED is maintenance free. LED is less consuming electric power and stronger to vibration resistance com-
pared to the bulb.
All LEDs light up immediately after turning the ignition switch on.
To Next Page
Need help?
General
