6-60 CHASSIS
FRONT BRAKE
CONSTRUCTION
1 Front brake lever
2 Dust boot
3 Piston set
4 Piston set (Trailing)
5 Piston set (Leading)
6 Brake pad
7 Brake pad spring
8 Pad mounting pin
9 Brake hose
0 Brake hose
A Front master cylinder mounting bolt
B Brake hose union bolt
C Caliper mounting bolt
D Caliper air bleeder valve
E Caliper housing bolt
!
ITEM N
.
m kgf
.
m lb-ft
A 10 1.0 7.0
B 23 2.3 16.5
C 25 2.5 18.1
D 8 0.8 6.0
E 21 2.1 15.1
"
* This brake system is filled with an ethylene glycol-based DOT 4 brake fluid. Do not use mix
different types of fluid such as silicone-based or petroleum-based.
* Do not use any brake fluid taken from old, used or unsealed containers. Never reuse brake fluid
left over from the last servicing or stored for long periods.
* When storing the brake fluid, seal the container completely and keep away from children.
* When replenishing brake fluid, take care not to get dust into fluid.
* When washing brake components, use fresh brake fluid. Never use cleaning solvent.
* A contaminated brake disc or brake pad reduces braking performance. Discard contaminated
pads and clean the disc with high quality brake cleaner or neutral detergent.
#
Handle brake fluid with care: the fluid reacts chemically with paint, plastics, rubber materials etc.
To Next Page
Loading...
Need help?
General
