10-12 GSX-R750K1 (’01-MODEL)
CLUTCH
CLUTCH REASSEMBLY
DRIVE PLATE:
Identify drive plates, No. 1, No. 2 and No. 3 according to the fol-
lowing table.
DRIVE PLATE PART NO. IDENTIFICATION
No.1 21441-31E50 Purple paint
No.2 21441-31E60 Green paint
No.3 21440-35F00 Dampers
• No.3 drive plate claws have dampers 1 on claws.
DRIVEN PLATE:
Identify driven plates, No. 1 and No. 2, according to the following
table.
DRIVEN PLATE PART NO. THICKNESS
No.1 21451-31E00 1.6 mm (0.06 in)
No.2 21451-31E10 2.0 mm (0.08 in)
No.3 Drive Plate
Direction of outside
DRIVE PLATE:
A No.1 Drive Plate ...................................... 8 pcs.
B No.2 Drive Plate ...................................... 1 pc.
C No.3 Drive Plate ...................................... 1 pc.
DRIVE PLATE:
a No.1 Driven Plate ....................................6 – 8 pcs.
b No.2 Driven Plate ....................................1 – 3 pcs.
NOTE:
The No.2 Driven plate should be installed between first to third position from the pressure plate.
To Next Page
Loading...
Need help?
General
