Engine Mechanical: 1D-59
Width Between Crankshaft Webs
B827H11406036
Measure the width between crankshaft webs “a”.
Width between crankshaft webs “a”
Standard: 59.9 – 60.1 mm (2.36 – 2.37 in)
Crankshaft Oil Seal Inspection
B827H11406037
Check the oil seals for damage. If any damage is found,
replace the oil seal with a new one. Refer to “Engine
Bottom Side Disassembly (Page 1D-34)” and “Bearing
Removal and Installation (Page 1D-60)”.
Bearing Inspection
B827H11406038
Refer to “Engine Bottom Side Disassembly (Page 1D-
34)”.
Rotate the bearing inner race by finger to inspect for
abnormal play, noise and smooth rotation while the
bearings are in the crankcase. Replace the bearing if
there is anything unusual.
LT-A400/F left crankcase
LT-A400/F right crankcase
LT-F400/F left crankcase
LT-F400/F right crankcase
LT-A400/F generator cover
“a”
I705H1140149-04
I827H1140270-01
I827H1140271-01
I827H1140272-01
I827H1140273-01
I827H1140274-01
I827H1140275-01
To Next Page
Loading...
Need help?
General
