Suzuki LT-F400F Service Manual

5A-23 Automatic Transmission:
Drive Train
Unit: mm (in) Except ratio
Transmission
Unit: mm (in)
Tightening Torque Specifications
B827H15107002
NOTE
The specified tightening torque is also described in the following.
“Automatic Transmission Components (Page 5A-5)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List (LT-A400/F) in
Section 0C (Page 0C-9)”.
Special Tools and Equipment
Recommended Service Material
B827H15108001
NOTE
Required service material is also described in the following.
“Automatic Transmission Components (Page 5A-5)”
Item Standard Limit
Primary reduction ratio (Automatic
drive)
Variable change (2.938 – 0.813) —
Secondary reduction ratio 2.730 (42/19 x 21/17) —
Final reduction
ratio
Front and rear 3.600 (36/10) —
Transfer gear
ratio
Low 2.500 (40/16) —
High 1.375 (33/24) —
Reverse 2.125 (34/16) —
Item Standard Limit
Drive V-belt width 28.4 (1.12) 27.4 (1.08)
Movable driven face spring free
length
215.0 (8.46) 204.3 (8.04)
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Movable drive face nut 115 11.5 83.0 )(Page 5A-9)
Movable driven face nut 115 11.5 83.0 )(Page 5A-9)
Movable driven face ring nut 100 10.0 72.5 )(Page 5A-14)
Clutch shoe nut 150 15.0 108.5 )(Page 5A-17)
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE A or
equivalent
P/No.: 99000–25010 )(Page 5A-8) / )(Page 5A-
10) / )(Page 5A-13) /
)(Page 5A-13) /
)(Page 5A-19) /
)(Page 5A-21)
Molybdenum oil MOLYBDENUM OIL SOLUTION — )(Page 5A-17)
Thread lock cement THREAD LOCK CEMENT SUPER
1303 or equivalent
P/No.: 99000–32030 )(Page 5A-17) /
)(Page 5A-21)

Suzuki LT-F400F Specifications

General

Brand	Suzuki
Model	LT-F400F
Category	Offroad Vehicle
Language	English