Suzuki LT-F400F Service Manual

Differential: 3B-34
Specifications
Service Data (LT-A400/F, LT-F400/F)
B827H13207001
Drive Train
Unit: mm (in)
Tightening Torque Specifications
B827H13207002
NOTE
The specified tightening torque is also described in the following.
“Front Drive (Differential) Components (LT-A400F, LT-F400F) (Page 3B-2)”
“Front Drive (Differential) Construction (LT-A400F, LT-F400F) (Page 3B-3)”
“Final Gear Components (Page 3B-19)”
“Final Gear Construction (Page 3B-20)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List (LT-A400/F) in
Section 0C (Page 0C-9)”.
Item Standard Limit
Front drive (differential) gear backlash 0.05 – 0.10 (0.0020 – 0.0040) —
Final gear backlash 0.08 – 0.13 (0.0031 – 0.0051) —
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Front drive (differential) gear case mounting nut 45 4.5 32.5 )(Page 3B-5)
Front drive (differential) gear case cover bolt
23 2.3 16.5
)(Page 3B-13) /
)(Page 3B-15) /
)(Page 3B-17) /
)(Page 3B-18)
Rear axle housing mounting bolt (final gear
case)
55 5.5 40.0
)(Page 3B-22)
Rear axle housing mounting nut (swingarm) 60 6.0 43.5 )(Page 3B-23)
Final gear case cover bolt 23 2.3 16.5. )(Page 3B-27)
Final drive gear bearing lock-nut
80 8.0 58.0
)(Page 3B-27) /
)(Page 3B-30)
Final gear coupling nut 100 10.0 72.5 )(Page 3B-28)
Final gear case cover bolt
23 2.3 16.5
)(Page 3B-31) /
)(Page 3B-32)

Suzuki LT-F400F Specifications

General

Brand	Suzuki
Model	LT-F400F
Category	Offroad Vehicle
Language	English