1E-17 Engine Lubrication System:
Tightening Torque Specifications
B827H11507002
NOTE
The specified tightening torque is also described in the following.
“Oil Cooler And Oil Hose Components (Page 1E-9)”
“Cooling Fan Components (Page 1E-12)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List (LT-A400/F) in
Section 0C (Page 0C-9)”.
Special Tools and Equipment
Recommended Service Material
B827H11508001
NOTE
Required service material is also described in the following.
“Oil Cooler And Oil Hose Components (Page 1E-9)”
Special Tool
B827H11508002
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Main oil gallery plug 23 2.3 16.5 )(Page 1E-5)
Oil pump drive gear bolt 80 8.0 58.0 )(Page 1E-8)
Oil cooler hose bolt (engine side) 10 1.0 7.0 )(Page 1E-11)
Oil cooler hose bolt (oil cooler side) 10 1.0 7.0 )(Page 1E-11)
Cooling fan thermo-switch 20 2.0 14.5 )(Page 1E-13)
Engine oil temperature switch 23 2.3 16.5 )(Page 1E-14)
Oil pressure regulator 23 2.3 16.5 )(Page 1E-15)
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE A or
equivalent
P/No.: 99000–25010 )(Page 1E-5)
Thread lock cement THREAD LOCK CEMENT SUPER
1303 or equivalent
P/No.: 99000–32030 )(Page 1E-8)
THREAD LOCK CEMENT SUPER
1360 or equivalent
P/No.: 99000–32130 )(Page 1E-11)
09900–06107 09900–25008
Snap ring pliers Multi-circuit tester set
)(Page 1E-7) )(Page 1E-14) /
)(Page 1E-15)
09900–26006 09915–74511
Engine tachometer (solar
cell type)
Oil pressure gauge set
)(Page 1E-4) )(Page 1E-4)