5C-3 Clutch:
Clutch Removal and Installation (LT-F400/F)
B827H15306016
Remove
1) Drain engine oil. Refer to “Engine Oil and Filter
Replacement in Section 0B (Page 0B-7)”.
2) Remove the right footrest mudguard. Refer to
“Exterior Parts Removal and Installation in Section
9D (Page 9D-3)”.
3) Remove the clutch adjuster cap (1).
4) Remove the clutch cover.
5) Remove the dowel pins and gasket (2).
6) Remove the washer (3), clutch release arm (4) and
clutch release roller guide (5).
7) Remove the clutch release plate (6) and springs.
8) Hold the clutch sleeve hub with the special tool and
remove the clutch shoe nut.
CAUTION
!
The clutch shoe nut has left-hand threads.
Special tool
(A): 09920–53730 (Clutch sleeve hub
holder)
1
I827H1530002-02
I827H1530003-01
2
I827H1530004-01
3
5
4
I827H1530005-01
6
I827H1530006-01
(A)
I827H1530007-01
To Next Page
Loading...
Need help?
General
