4B-5 Front Brakes:
5) Place a rag over the brake caliper piston to prevent it
from popping out and then force out the piston using
compressed air.
CAUTION
!
Do not use high pressure air to prevent brake
caliper piston damage.
6) Remove the dust seal (6) and piston seal (7).
Assembly
Assemble the caliper in the reverse order of
disassembly. Pay attention to the following points:
• Wash the caliper bores and pistons with specified
brake fluid. Particularly wash the dust seal groove and
piston seal groove.
BF: Brake fluid (DOT 4)
CAUTION
!
• Wash the caliper components with fresh
brake fluid before reassembly. Never use
cleaning solvent or gasoline to wash them.
• Do not wipe the brake fluid off after
washing the components.
• When washing the components, use the
specified brake fluid. Never use different
types of fluid or cleaning solvent such as
gasoline, kerosine or the others.
• Apply the brake fluid to piston seal (1) and dust seal
(2).
CAUTION
!
Replace the piston seal (1) and dust seal (2)
with new ones.
BF: Brake fluid (DOT 4)
I827H1420025-01
6
7
I827H1420012-01
I649G1430018-02
To Next Page
Loading...
Need help?
General
