1G-8 Fuel System:
Fuel Tank Removal and Installation
B822H11706010
Removal
WARNING
!
• Keep away from fire or spark.
• Spilled gasoline should be wiped off
immediately.
• Work in a well-ventilated area.
1) Remove the seat. Refer to “Exterior Parts Removal
and Installation in Section 9D (Page 9D-3)”.
2) Remove the combination meter. Refer to
“Combination Meter Removal and Installation in
Section 9C (Page 9C-2)”.
3) Remove the fuel tank mounting bolts.
4) Lift and support the fuel tank.
5) Place a rag under the fuel feed hose and disconnect
the fuel feed hose (1).
CAUTION
!
When removing the fuel tank, do not leave
the fuel feed hose (1) on the fuel pump side.
6) Disconnect the fuel tank breather hose (For E-33).
7) Disconnect the fuel pump lead wire coupler (2).
8) Remove the fuel tank.
Installation
Install the fuel tank in the reverse order of removal. Pay
attention to the following point:
CAUTION
!
Be careful not to bend the hoses.
• Connect the fuel feed hose (1) until it locks securely (a
click is heard).
I822H1170008-01
1
I822H1170009-02
2
I822H1170010-02
1
I822H1170009-02
To Next Page
Loading...
Need help?
General
