Brake Control System and Diagnosis: 4A-17
• Apply grease to the push rod end.
: Grease 99000–25100 (SUZUKI Silicone
Grease or equivalent)
• Install the O-ring (1) and brake hose connector (2).
CAUTION
!
Replace the O-ring (1) with a new one.
• Install the snap ring (3).
CAUTION
!
Do not reuse the snap ring (3).
Rear Brake Master Cylinder Parts Inspection
B822H14106018
Refer to “Rear Brake Master Cylinder Disassembly and
Assembly (Page 4A-16)”.
Master Cylinder
Inspect the master cylinder bore for any scratches or
other damage.
Cup Set
Inspect the cup set for other damage.
Piston
Inspect the piston surface for any scratches or other
damage.
Rubber Parts
Inspect the primary cup, secondary cup and dust boot
for wear or damage.
I822H1410042-01
1
2
3
I822H1410043-03
I822H1410044-02
I822H1410045-01
I649G1410039-02
To Next Page
Loading...
Need help?
General
