Wheels and Tires: 2D-11
Rear Wheel Assembly Removal and Installation
B822H12406008
Removal
1) Support the motorcycle with the jack or wooden
block.
2) Remove the rear fender. Refer to “Exterior Parts
Removal and Installation in Section 9D (Page 9D-
3)”.
3) Remove the rear brake caliper. Refer to “Rear Brake
Caliper Removal and Installation in Section 4C
(Page 4C-3)”.
CAUTION
!
Do not operate the brake pedal while
removing the caliper.
NOTE
It is unnecessary to disengage the brake
hose from the caliper.
4) Remove the brake caliper bracket mounting bolt (1).
5) Remove the cap (2).
6) Hold the rear axle with the special tool and remove
the axle nut (3) and washer (4).
Special tool
(A): 09944–28320 (Hexagon socket (19
mm))
7) Remove the brake caliper bracket (5) and collar (6)
by drawing the rear axle.
1
I822H1240015-01
2
I822H1240016-01
(A)
4 3
I822H1240017-02
5
6
I822H1240018-02
To Next Page
Loading...
Need help?
General
