Engine Lubrication System: 1E-11
Specifications
Service Data
B822H11507001
Oil Pump
Oil
Tightening Torque Specifications
B822H11507002
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-8)”.
Item Standard Limit
Oil pressure (at 60 °C, 140 °F)
Above 400 kPa (4.0 kgf/cm
2
, 57 psi)
Below 700 kPa (7.0 kgf/cm
2
, 100 psi)
at 3 000 r/min
—
Item Specification Note
Engine oil type SAE 10W-40, API SF/SG or SH/SJ with JASO MA
Engine oil capacity
Change 3 400 ml (3.6/3.0 US/lmp qt)
Filter change 3 600 ml (3.8/3.2 US/lmp qt)
Overhaul 5 000 ml (5.3/4.4 US/lmp qt)
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Oil gallery plug (M16) 35 3.5 25.5 )(Page 1E-4)
Oil gallery plug (M10) 20 2.0 14.5 )(Page 1E-4)
Oil cooler union bolt 70 7.0 50.5 )(Page 1E-6)
Oil pressure switch 14 1.4 10.0 )(Page 1E-7)
Oil pressure switch lead wire bolt 1.5 0.15 1.0 )(Page 1E-7)
Piston cooling oil jet bolt 10 1.0 7.0 )(Page 1E-9)
To Next Page
Loading...
Need help?
General
