Suzuki VLR1800 Service Manual

5B-4 Manual Transmission:
2) Remove the gearshift fork shafts (3) and gearshift
forks (4).
3) Remove the gearshift cam bearing (5) and gearshift
cam (6).
Bearing
Remove the gearshift cam bearing (1) with the special
tools.
Special tool
(A): 09923–74511 (Bearing puller)
(B): 09930–30104 (Rotor remover slide shaft)
Transmission Installation
B822H15206003
Install the transmission in the reverse order of removal.
Pay attention to the following points:
Bearing
CAUTION
!
Replace the removed bearing with a new one.
Install the bearing (1) with the special tool.
NOTE
The stamped mark side of the gearshift cam
bearing (1) faces outside.
Special tool
(A): 09913–70210 (Bearing installer set)
Gearshift Cam / Gearshift Fork
• Install the gearshift cam (1) and bearing (2).
3
4
4
3
4
I822H1520007-02
5
6
I822H1520008-01
(A)
(B)
1
I822H1520009-01
(A)
1
I822H1520010-02
1
2
I822H1520011-01

Suzuki VLR1800 Specifications

General

Brand	Suzuki
Model	VLR1800
Category	Motorcycle
Language	English