Suzuki VLR1800 Service Manual

9B-10 Lighting Systems:
Dimmer Switch Inspection
B822H19206022
Inspect the dimmer switch in the following procedures:
1) Remove the headlight assembly. Refer to “Headlight
Removal and Installation (Page 9B-2)”.
2) Disconnect the left handlebar switch coupler (1).
3) Inspect the dimmer switch for continuity with a tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to “Handlebars Removal and Installation in
Section 6B (Page 6B-2)”.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
4) After finishing the dimmer switch inspection, reinstall
the removed parts.
Specifications
Service Data
B822H19207001
Wattage
Unit: W
Special Tools and Equipment
Special Tool
B822H19208001
1
I822H1920029-02
Color
W Y Y/W
HI ( )
LO ( )
Position
I822H1920030-03
Item
Specification
E-03, 28, 33 E-02, 19, 24
Headlight
HI 60 ←
LO 55 ←
Position light — 5
Front turn signal light/Position light 21/5 —
Front turn signal light — 21
Rear turn signal light 21 ←
License plate light 5 ←
09900–25008
Multi-circuit tester set
)(Page 9B-3) / )(Page 9B-
9) / )(Page 9B-9) /
)(Page 9B-9) / )(Page 9B-
10)

Suzuki VLR1800 Specifications

General

Brand	Suzuki
Model	VLR1800
Category	Motorcycle
Language	English