Suzuki VLR1800 Service Manual

Lighting Systems: 9B-9
3) Inspect the hazard switch for continuity with a tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one. Refer to
“Handlebars Removal and Installation in Section 6B
(Page 6B-2)”.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
4) After finishing the hazard switch inspection, reinstall
the removed parts.
Turn Signal Switch Inspection
B822H19206020
Inspect the turn signal switch in the following
procedures:
1) Remove the headlight assembly. Refer to “Headlight
Removal and Installation (Page 9B-2)”.
2) Disconnect the left handlebar switch coupler (1).
3) Inspect the turn signal switch for continuity with a
tester. If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to “Handlebars Removal and Installation in
Section 6B (Page 6B-2)”.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
4) After finishing the turn signal switch inspection,
reinstall the removed parts.
Passing Light Switch Inspection
B822H19206021
Inspect the passing light switch in the following
procedures:
1) Remove the headlight assembly. Refer to “Headlight
Removal and Installation (Page 9B-2)”.
2) Disconnect the left handlebar switch coupler (1).
3) Inspect the passing light switch for continuity with a
tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to “Handlebars Removal and Installation in
Section 6B (Page 6B-2)”.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
4) After finishing the passing light switch inspection,
reinstall the removed parts.
Color
B Lbl Lg
OFF
ON
Position
I822H1920024-01
1
I822H1920025-04
L
PUSH
R
Lg Lbl B
Color
Position
I822H1920026-01
1
I822H1920027-02
PUSH
Color
Y/W Y
Position
I822H1920028-02

Suzuki VLR1800 Specifications

General

Brand	Suzuki
Model	VLR1800
Category	Motorcycle
Language	English