108 Part F: Configuring Channels © Tait Electronics Limited December 2007
Editing a Channel Profile
The Edit Channel Profile dialog box lets you view the details of the selected
channel profile and modify them.
Next Profile and Previous Profile let you move from one profile to another
without leaving the dialog box.
Important: If you have made changes to the current profile, click
OK to confirm them before moving to another profile.
Some items in the Default channel profile display ‘See channel
table.’ You specify them individually for each channel in the channel table
(Configure > Base Station > Channel Table).
General
The General tab in the Add or Edit Channel Profile dialog box names the
channel profile and defines its general characteristics.
Profile name Specifies the name of the profile. You can edit the name of custom profiles.
RF Configuration
In the Add or Edit Channel Profile dialog, General tab, the RF configuration
area lets you specify the nominal channel spacing for the receiver and the
transmitter. No hardware modification is necessary when the RF configuration
is changed.
Note: Your country may use Narrow band, Mid band and Wide
band to refer to different channel spacings. Make sure that the
option you select has the correct value.
To Next Page
Loading...
Need help?
General
