TB8100 Service Kit User’s Manual Changing Base Station Passwords 53
Changing Base Station Passwords
Each base station stores its own password for each of the three access levels. If
you log on to the base station as Administrator, you can change any of these
passwords. While the base station is password-protected, the Service Kit is not.
To change a password
1. Select Base Station > Change Passwords, and then select the appropriate
sub-option for the password that you want to change. The Change User
Password dialog box appears.
2. Enter the Administrator password.
3. Enter the new password.
4. Re-enter the password in the next box.
5. Click OK to change the password and close the dialog box.
Important: Take care not to lose the Administrator password.
To Next Page
Loading...
Need help?
General
