TB8100 Service Kit User’s Manual Diagnosing 167
Part H Diagnosing
Using the Service Kit, you can carry out diagnostic tests on the
base station and its modules. While you can view a diagnostic
form in Run mode, the base station must be in Standby mode for
the test itself.
Generally a diagnostic form displays relevant information, so that
you can monitor base station status before, during, and after the
test. Often you can combine different tests.
Some diagnostic tests check aspects of the base station. Others
provide you with a simple function (for example, a voltage on the
RSSI output pin) that facilitates setting up or troubleshooting the
base station’s interface to external equipment.
Topics
Q Carrying Out Diagnostic Tests
Q System Tests
Q Reciter Tests
Q Power Amplifier Tests
Q Power Management Unit Tests
To Next Page
Loading...
Need help?
General
