126 Part F: Configuring Channels © Tait Electronics Limited December 2007
Working with Signalling Profiles
The Signalling Profiles form displays a list of the current signalling profiles.
Buttons along the bottom of the form let you add a new profile or copy, edit,
or delete the selected profile.
Adding a Signalling Profile
The Add Signalling Profile dialog box lets you define the settings for a signalling
profile and add it to the list of available profiles. It is almost the same as the Edit
Signalling Profile dialog box. For detailed information, see “Editing a Signalling
Profile” on page 129.
Important: If the base station doesn’t have an Advanced Profiles
license, it makes no sense to create profiles. The Service Kit lets you
create them, but you will not be able to apply them to the channels
in the channel table.
Tip: Set up a test profile and assign it to a channel. Use this channel
when testing your system before commissioning.
To Next Page
Loading...
Need help?
General
