Tait TB8100 User Manual

TB8100 Service Kit User’s Manual Working with the Software Feature Enabler 63
The progress bar indicates how far the disabling has progressed. On
completion, a new number appears in the Feature License Key column.
Communicate this new number to Tait if you are entitled to a refund or if
you want to re-enable the feature set.
Disabling the Power Saving Modes Feature Set
You can only disable this feature set if the base station does not use it.
Important: A disabled feature set can only be re-enabled by
purchasing a new license key. The original feature license key
cannot be re-used.
1. Check the Reciter Serial Number box to make sure that you are logged
on to the correct base station.
2. Make sure that all channel profiles have Sleep and Deep Sleep modes
disabled.
3. Go into Standby mode.
4. Select Tools > Software Feature Enabler.
5. Select the feature set’s row.
6. Click Disable.
The progress bar indicates how far the disabling has progressed. On
completion, a new number appears in the Feature License Key column.
Communicate this new number to Tait if you are entitled to a refund or if
you want to re-enable the feature set.
Disabling the Default Radio System Feature Set
If the Default Radio System feature set is disabled, the base station cannot
operate in Run mode. You can configure it, monitor it, and carry out
diagnostic tests on it, but not use it as a base station. It is suitable for training
purposes only.
Important: A disabled feature set can only be re-enabled by
purchasing a new license key. The original feature license key
cannot be re-used.
1. Check the Reciter Serial Number box to make sure that you are logged
on to the correct base station.
2. Go into Standby mode.
3. Select Tools > Software Feature Enabler.
4. Select the feature set’s row.
5. Click Disable.
The progress bar indicates how far the disabling has progressed. On
completion, a new number appears in the Feature License Key column.
Communicate this new number to Tait if you are entitled to a refund or if
you want to re-enable the feature set.

Tait TB8100 Specifications

General

Brand	Tait
Model	TB8100
Category	Accessories
Language	English